1. I took my car to electrician. He successfully diagnosed the problem. There was some oxidation on the lighter socket. Car lighter has power even if car is not running. So because of that oxidation it was getting in shortcut and drain my battery. I also replaced to battery with higher cca as @Kate recRead more

    I took my car to electrician. He successfully diagnosed the problem. There was some oxidation on the lighter socket. Car lighter has power even if car is not running. So because of that oxidation it was getting in shortcut and drain my battery.

    I also replaced to battery with higher cca as Kate recommended.

    Everything works fine so far.

    See less
  2. P0002 indicates that the fuel pressure regulator is not functioning correctly. This means that the ECU detects that it cannot control the amount of fuel sent to the injectors. This can cause the engine to run unevenly or go into fault mode. Possible causes: Even if the high-pressure fuel pump (HP puRead more

    P0002 indicates that the fuel pressure regulator is not functioning correctly. This means that the ECU detects that it cannot control the amount of fuel sent to the injectors. This can cause the engine to run unevenly or go into fault mode.

    Possible causes:

    • Even if the high-pressure fuel pump (HP pump) has been replaced, the replacement pump may not be operating efficiently (remanufactured, reconditioned, etc.).
    • The regulator (SCV valve) or pressure sensor response may be weak.
    • Air in the fuel line: Hose connections, clamp leaks, etc.
    • Electrical contact failure or interrupted signal: Injector, regulator sockets, short circuit risks.
    • ECU software problem: The injection map and sensor signals may not be supporting each other.
    See less
  3. I bet that's wiring issue 100%.Just focus on wires around actuator.

    I bet that’s wiring issue 100%.Just focus on wires around actuator.

    See less